Shure BLX288/PG58 Dual-Transmitter Handheld Wireless System with 2 PG58 Mics (J10: 584 - 608 MHz)SKU: 10343
The BLX288/PG58 Dual-Transmitter Handheld Wireless System from Shure includes a BLX88 dual-channel wireless receiver and two BLX2 handheld transmitters, both with PG58 microphone capsules. The system is set to Shure's J10 frequency band and operates between 584 to 608 MHz.
Both of the BLX2 handheld transmitters have a 300' line of sight operation range with the BLX88 receiver. They are each powered by two included AA batteries that can operate for up to 14 hours. The BLX88 receiver features microprocessor-controlled internal antenna diversity that helps prevent interference and signal dropouts. Its one-touch QuickScan feature detects the most interference-free frequency and sets the channel to it for fast setup. The BLX2 handheld transmitters feature an on/off switch on the mic body and are tuned for vocal applications.
BLX88 Dual-Channel Wireless Receiver (J10: 584 - 608 MHz)
The BLX88 Dual-Channel Wireless Receiver from Shure is a dual-channel receiver set to Shure's J10 frequency band and operates between 584 to 608 MHz. It has microprocessor-controlled internal antenna diversity for reduced signal interference and dropouts. The one-touch QuickScan frequency selection feature allows you to quickly locate the frequency with the least amount of interference available.
Its front-panel dual-color LED status indicator displays green for normal levels and red when clipping for fast metering. It has two XLR outputs in additional to two instrument-level 1/4" outputs. The BLX88 can be used with up to 11 other compatible systems simultaneously per frequency band.
BLX2 Handheld Transmitter with PG58 Microphone (J10: 584 - 608 MHz
The BLX2 Handheld Transmitter with PG58 Microphone from Shure is set to Shure's J10 frequency band between 584 to 608 MHz MHz and provides a 300' line of sight operating range. It is powered by two included AA batteries for up to 14 hours. It is compatible with Shure BLX wireless systems set to the same frequency band. A padded zipper case and microphone clip are included.
- Power Supply
- Limited 2-Year Warranty
- 2 x AA Batteries
- Microphone Clip
- Limited 2-Year Warranty
Output 2x XLR Output
2x 1/4" (6.35 mm) Output
Output Impedance XLR: 200 ohms
1/4": 50 ohms
Audio Output Level XLR Connector: -20.5 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone)
1/4": -13 dBV into 100 kOhm Load (Reference +/-33 kHz with 1 kHz Tone)
RF Sensitivity -105 dBm for 12 dB SINAD, Typical Image Rejection >50 dB, Typical Housing Molded ABS Power Requirement 12 to 15 VDC @ 320 mA, Supplied by External Power Supply (Tip Positive) Dimensions (H x W x D) 1.5 x 15 x 4.5" (40 x 388 x 116 mm) Weight 15.1 oz (429 g) Box Dimensions (LxWxH) 19.4 x 16.5 x 3.1" Audio Input Level 0 dB Gain: -20 dBV Maximum
-10 dB Gain: -10 dBV Maximum
Gain Adjustment Range 10 dB RF Output 10 mW, Typical (Varies by Region) Power Requirement 2x LR6 AA Batteries, 1.5 V Alkaline Housing Molded ABS Dimensions (Ø x L) 2.1 x 8.8" (53 x 224 mm) Weight 7.7 oz (218 g) Type Dynamic (Moving Coil) Polar Pattern Cardioid Frequency Response 60 Hz to 15 kHz Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector Sensitivity -53 dBV/Pa, (2.2 mV), 1 Pascal=94 dB SPL (@ 1 kHz) Electromagnetic Hum Sensitivity 26 dB equivalent SPL in a 1 millioersted field (60 Hz) Temperature Range -20 to 153°F (-29 to 57°C) Relative Humidity 0 to 95% Box Dimensions (LxWxH) 11.0 x 5.4 x 3.3"
We Also Recommend